Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Disabling System (Century, Grand Prix, Intrigue & Regal)
2000 Saturn SLSECTION Disabling System (Century, Grand Prix, Intrigue & Regal)
- Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS . Turn front wheels to straight-ahead position. Turn ignition switch to OFF position and remove key.
- Remove fuse block access door on far right end of instrument panel. Remove AIR BAG fuse. Wait 10 minutes. Remove sound insulator panel from under lower left side of instrument panel. Remove Connector Position Assurance (CPA) clip, and disconnect driver 2-pin Yellow SIR connector at base of steering column. See Fig 1.
- Remove Connector Position Assurance (CPA) clip, and disconnect passenger 2-pin Yellow SIR connector. Connector is located to right of steering column. See Fig 2.
- On Century and Regal only, move driver's seat as far back as possible. Remove CPA clip and disconnect the driver side air bag 2-pin Yellow SIR connector, if equipped. Connector is located under driver's seat.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.