Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SATURN Field Product Reminder - Vehicle Fix It Right The First Time Issues, Parts Restriction Information And Technical Bulletins Released In November 2004 (04-00-89-058)
Reference number: 04-00-89-058
SATURN FIELD PRODUCT REMINDER - VEHICLE FIX IT RIGHT THE FIRST TIME ISSUES, PARTS RESTRICTION INFORMATION AND TECHNICAL BULLETINS RELEASED IN NOVEMBER 2004
TECHNICAL SERVICE BULLETIN
| SATURN: | 2005 and Prior Model Year Vehicles |
| SECTION: | 00 - General Information |
SERVICE INFORMATION
In order to access this bulletin electronically, go to the SI Home Page (http://service.gm.com) and select the "Latest News" icon. The documents are arranged by sub-section and then by date (newest to oldest). Scroll down to "General Information" then click on the latest "Field Product Reminder" bulletin.
| Model Year(s) | Vehicle Line(s) / Condition | Do This | Don't Do This | Reference Information / Bulletin |
|---|---|---|---|---|
| 2003 - 2004 | IONs Built Prior to VIN Breakpoint 4Z210712 - No Crank, No Start When Ambient Temperature is Cold - Diagnostic Trouble Codes (DTCs) B2960 and/or B3033 are Set in BCM History | Navigate to BCM history with TECH 2 and inspect for DTC(s). If found replace ignition switch with P/N 10392423. If an ignition switch was replaced prior to June 2004, replace ignition switch again. | Don't replace the ignition housing, which does not contain the passlock sensor. | 04-08-45-005 |
| 2003 - 2005 | ION - Alignment Specifications | Reference the appropriate year service information in Electronic Service Information (ESI) for the most up to date and accurate alignment specifications. | Don't rely on alignment specs that are resident within the alignment machine as some may be incorrect. | Reference the appropriate year service information in Electronic Service Information (ESI). |
| 2004 | VUE with 3.5L V-6 Engine (VIN 4 - RPO L66) Cruise Control Inoperative and/or Service Engine Soon (SES) Telltale Illuminated with DTC P0571 Stored in Powertrain Control Module (PCM) | Clear DTC with Tech 2 and wait for future software updates and field communication. | Don't reprogram PCM or replace other cruise control system components. | Service bulletin in process. |
| 2004 | VUE with 5-speed Automatic Transaxle (RPO MJ7/MJ8) Service Engine Soon (SES) Telltale Illuminated with DTC P0873 Stored in Transaxle Control Module (TCM) | Replace 4th clutch pressure switch. | Don't replace the 3rd clutch pressure switch. The Tech 2 software will incorrectly describe P0873 as a 3rd clutch pressure switch problem when, in fact, it is a 4th clutch pressure switch problem. | Reference the appropriate year service information in Electronic Service Information (ESI). |
| 2005 | Relay - Interior Lights Flicker or Dim | Refer to PI for description of condition being ""normal"". | Don't replace generator or any other electrical components. | PI PIT3246 |
| 2002 - 2003 | VUE Vehicles with 3.0L V-6 Engine (VIN B - RPO L81) - Service Engine Soon (SES) and/or Reduced Power Lamp Illuminated, Limited Throttle Response Following Cold Engine Start Up, DTC P0638 | Re-locate primary Positive Crankcase Ventilation (PCV) Hose and re-route secondary PCV hose per procedures in bulletin. | Don't replace throttle body, PCM, or other related throttle control components. | 04-06-04-074 |
| 2000 - 2005 | L-Series with 3.0L V6 Engine (VIN R - RPO L81) Service Engine Soon Lamp Illuminated with DTCs P0130 ""HO2S Circuit Bank 1Sensor 1"", P0135 ""HO2S Heater Circuit Performance Bank 1 Sensor 1"", P0150""HO2S Circuit Bank 2 Sensor 1"" and/or P0155 ""HO2S Heater PerformanceBank 2 Sensor 1"" | Perform oxygen sensor conditioning drive cycle. | Don't replace oxygen sensor(s). | 04-06-04-008A |
| 2003 - 2005 | ION Vehicles with Air Conditioning (RPO C60) - Moisture (Air Conditioning Condensation) Leaking onto Vehicle Floor when A/C Systemis Running | Remove obstruction from evaporator drain hole. | Don't replace HVAC case half or any other A/C components. | 04-01-38-016 |
| 2003 - 2004 | ION - Squeak, Rattle, Pop or Clunk Noise from Front of Vehicle During Suspension Movement | Use chassis ears to verify the noise is coming from the sway bar bushing and replace if necessary. | Don't replace steering rack, upper strut mounts, sway bar end links or lower control if chassis ears indicate noise is coming from sway bar bushing. | 04-03-08-003A |
| 2003 | ION - Clunk, Thump or Rattle Noise from Front Suspension while Driving Over Rough Road Conditions or when Braking | Replace ION lower control arm bushings by pressing the old bushing out and pressing a new one in. | Don't replace the complete lower control arm just for a lower control arm rear bushing concern. | 04-03-08-006 |
| 2004 | VUE with 3.5L V-6 Engine (VIN 4 - RPO L66) - B1372 along with various U-codes (i.e. U2105, U2106, etc.) | Clear DTC with Tech 2 and wait for future field communication. | Don't replace controllers/modules. | ESI PI PIC3258 |
| 2004 | ION - Cruise Control Inoperative and/or Service Engine Soon (SES) TelltaleIlluminated with Diagnostic Trouble Code (DTC) P1574 Stored in PowertrainControl Module | Clear DTC with Tech 2 and wait for future field communication. | Don't replace cruise switch, brake switch or other cruise control system components. | PI in process. Reference ESI for latest information. |
| 2003 - 2004 | ION Sedans - Instruction On When or If To Install Headlamp Harness on Vehicles Involved in Safety Recall 04095 | Follow Safety Recall instructions and install 2 new bulbs (and resistance if needed). If after new bulb(s) is installed and new bulb(s) will not illuminate, then and only then install new headlamp harness. | Don't replace the harness just because the socket appears deformed. | Safety Recall 04095 |
| 2002 - 2004 | VUE - with 5-speed AF33-5 Automatic Transaxle - No 3rd Gear (with or without p1719) After Trans Fluid Service | Remove trans fluid fill plug when adding transaxle fluid. | Don't remove the 3rd gear anchor bolt, which can be mistaken for the trans fluid fill plug. Removing the incorrect bolt will dislocate internal components, cause a no 3rd gear concern and require transaxle removal to correct. | 03-07-30-018 |
| Category Type | Subject | Model(s) | Model Year(s) | Bulletin Number |
|---|---|---|---|---|
| Brakes | Brake Pedal Pulsation and/or Vehicle Vibration During Brake Application (Diagnosis/Service Procedures) | S-Series | 1991-1995 | 04-05-22-022 |
| Engine/ Propulsion | Service Manual Update for Diagnostic Trouble Codes (DTC) P0033, P0068, P0101, P0102, P0171, P0172, P0230, P0335, P0507, P1101, P1182, P1516, P1682, P2125, P2176, and Fuel Injector Balance Test with Tech 2 | ION Red Line Coupe w/ VIN P - RPO LSJ | 2004-2005 | 04-06-04-084 |
| General Information | Revised Pre-Delivery Inspection (PDI) Form | All Saturn vehicles | 2004-2005 | 04-00-89-054 |
| Model Year(s) | Component on Restriction | Reference Info/Bulletin/Phone Number |
|---|---|---|
| 2004 | Saturn VUE MJ7/MJ8 Automatic Transmission Assemblies | Bulletin # 03-07-30-040 |
| 2004-2005 | Saturn VUE All-Wheel Drive (AWD) Transfer Case Assembly | Bulletin # 03-07-30-039A |
| 2004-2005 | Saturn XM Digital Radio Receiver | Bulletin # 04-08-44-009 |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.