Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2000LW2 AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 20 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEMS)TORQUE SPECIFICATIONS
2000 Saturn LW2 Automatic
Torque Specifications
2000 Saturn LW2 AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft-lbs N.m | |
|---|---|---|
| Steering wheel nut | 30 (41) | |
| Inch-lbs N.m | ||
| Center console nut | 89 (10) | |
| Driver-side air bag module fasteners | 54 (6) | |
| Front-end discriminating sensor fasteners | 89 (10) | |
| Glove box | ||
| Upper screws | 17 (1.9) | |
| Lower bolts | 106 (12) | |
| Instrument panel trim pad | ||
| to air bag module bracket bolt | 17 (1.9) | |
| to cluster bezel bolt | 12 (1.3) | |
| to defroster duct bolt | 17 (1.9) | |
| to hinge pillar bolt | 22 (2.5) | |
| to knee bolster bolt | 17 (1.9) | |
| Passenger-side air bag module fasteners | 89 (10) | |
| Sensing & Diagnostic Module (SDM) bolts | 89 (10) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.