Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Disabling System (Astro & Safari)
2000 Saturn LS AutomaticSECTION Disabling System (Astro & Safari)
- Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS . Turn front wheels to straight-ahead position. Turn ignition switch to OFF position. Remove key from ignition switch
- Remove AIR BAG fuse from instrument panel fuse block. Wait at least 10 MINUTES. Remove sound insulator panel (if equipped) from lower left side of instrument panel. Remove Connector Position Assurance (CPA) clip, and disconnect driver air bag Yellow 2-pin connector at base of steering column.
- Remove the instrument panel extension located at center console panel below A/C controls and radio. Remove CPA clip, and disconnect passenger air bag Yellow 2-pin connector located behind instrument panel extension.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.