Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Activating System (Prizm)
2000 Saturn LS AutomaticSECTION Activating System (Prizm)
- Remove key from ignition switch. Connect passenger side air bag Yellow 2-pin connector under seat. Secure lock tab. Repeat procedure for driver side air bag connector.
- Connect passenger air bag Yellow 2-pin connector. Secure lock tab. Install glove box. Connect driver air bag Yellow 2-pin connector. Secure lock tab. Install lower steering column cover.
- Reinstall IGN and CIG fuses. Keeping clear of air bag modules, turn ignition to ON position. AIR BAG warning light should illuminate for about 6 seconds, and then go off.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.