Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Description & Operation: Odometer
TRIP odometer and TOTAL odometer readings will show in the odometer digital display. The push button located in the lower right side of the speedometer is used to toggle between TRIP and TOTAL odometer readings. To reset TRIP odometer, push and hold button down for at least 2 seconds.
TOTAL odometer display has 6 digits with no decimal display. TRIP odometer has four digits including a decimal point, indicating tenths of a mile or kilometer. BCM stores the vehicle mileage and if BCM fails, cluster will display last valid mileage that was sent before BCM failed. If instrument cluster fails, the mileage stored in BCM will be sent to new instrument cluster through Class-2 serial data link.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.