Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1998SC1 L4-1.9L SOHC VIN 8REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSWHEEL HUBSYSTEM SPECIFICATIONS
1998 Saturn SC1 L4-1.9L SOHC VIN 8
System Specifications
1998 Saturn SC1 L4-1.9L SOHC VIN 8SECTION System Specifications
Fastener Torque Specifications:
Hub and bearing assembly-to-knuckle-rear 85 Nm (63 ft lb)
Hub and Bearing Assemblies Component Specifications:
Front:
End play 0.020 mm (0.001 in)
Lateral runout 0.040 mm (0.0016 in)
Rear:
End play 0.130 mm (0.005 in)
Lateral runout 0.050 mm (0.002 in)
Radial runout 0.130 mm (0.005 in)
Hub and bearing assembly-to-knuckle-rear 85 Nm (63 ft lb)
Hub and Bearing Assemblies Component Specifications:
Front:
End play 0.020 mm (0.001 in)
Lateral runout 0.040 mm (0.0016 in)
Rear:
End play 0.130 mm (0.005 in)
Lateral runout 0.050 mm (0.002 in)
Radial runout 0.130 mm (0.005 in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.