Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1998SC1 L4-1.9L SOHC VIN 8REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
1998 Saturn SC1 L4-1.9L SOHC VIN 8
Engine Mount
1998 Saturn SC1 L4-1.9L SOHC VIN 8SECTION Engine Mount
Motor Mount-Front-to-Block 70 Nm (52 ft. lbs.)
Motor Mount-Front-to-Front Cover
(Torque Axis Engine Mount) 50 Nm (37 ft. lbs.)
Motor Mount-Rear-to-Block (LH and RH) 48 Nm (35 ft. lbs.)
Torque Strut-to-Cradle Bracket and Engine Front Mount-RH
(Torque Axis Engine Mount) 50 Nm (37 ft. lbs.)
Upper Engine Mount-to-Front Cover and RH Frame Rail Bracket
(Torque Axis Engine Mount) 50 Nm (37 ft. lbs.)
Motor Mount-Front-to-Front Cover
(Torque Axis Engine Mount) 50 Nm (37 ft. lbs.)
Motor Mount-Rear-to-Block (LH and RH) 48 Nm (35 ft. lbs.)
Torque Strut-to-Cradle Bracket and Engine Front Mount-RH
(Torque Axis Engine Mount) 50 Nm (37 ft. lbs.)
Upper Engine Mount-to-Front Cover and RH Frame Rail Bracket
(Torque Axis Engine Mount) 50 Nm (37 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.