SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1998SC1 AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALELECTRIC COOLING FANSREMOVAL & INSTALLATIONENGINE COOLING FANDISASSEMBLY & REASSEMBLY
1998 Saturn SC1 Automatic

Disassembly & Reassembly

1998 Saturn SC1 AutomaticSECTION Disassembly & Reassembly

While holding fan, remove fan-to-motor nut (left-hand thread). Pull fan off of motor shaft. Remove screws and remove fan motor. See Fig 1 and Fig 2 . To reassemble, reverse disassembly procedure. Tighten fan nut to 27-44 INCH lbs. (3-5 N.m).

Fig 1: Exploded View Of Engine Cooling Fan (With Air Conditioning)
G00133967Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.