Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1993SC L4-1.9L SOHC VIN 9REPAIR AND DIAGNOSISLIGHTING AND HORNSTESTING AND INSPECTIONHIGH/LOW BEAM HEADLAMPSCOUPE/SC2CIRCUIT TESTINGPOWER CIRCUITSCIRCUIT 140C
1993 Saturn SC L4-1.9L SOHC VIN 9
Circuit 140C
1993 Saturn SC L4-1.9L SOHC VIN 9SECTION Circuit 140C
LOCATION:
Connects underhood junction block connector cavity D4 to right high/low beam connector cavity E.
TYPE:
Orange 22 gage wire
FUNCTION:
This circuit supplies battery voltage to the right high/low beam.
REPAIRS:
Check for OPEN or SHORTS
Repair as needed.
If this component is good, go to the next item indicated on the SYMPTOM CHART.
Connects underhood junction block connector cavity D4 to right high/low beam connector cavity E.
TYPE:
Orange 22 gage wire
FUNCTION:
This circuit supplies battery voltage to the right high/low beam.
REPAIRS:
Check for OPEN or SHORTS
Repair as needed.
If this component is good, go to the next item indicated on the SYMPTOM CHART.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.