Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Code P042, Front Oxygen Sensor Lean Signal: Notes
PCM provides a .45-volt reference signal to oxygen sensor on circuit No. 412. When oxygen sensor temperature is less than 392°F (200°C), sensor signal voltage will be about .45 volt and PCM will keep system in open loop operation. When oxygen sensor temperature is greater than 392°F (200°C), sensor will begin to generate a signal voltage. In a rich environment, signal voltage will be greater than .45 volt. In a lean environment, signal voltage will be less than .45 volt. If PCM is in good control of air/fuel mixture, mixture will change from rich to lean rapidly (at least one change every 2 seconds).
When PCM sees oxygen sensor is generating a signal voltage (greater than .45 volt), PCM will send system into closed loop operation. In closed loop operation, PCM will adjust fuel delivery rate to engine based on oxygen sensor readings. Code P042 sets if oxygen sensor stays at lean voltage more than 50 seconds during test conditions. Code P042 also sets when an oxygen sensor circuit fault giving a false lean indication exists or when air/fuel ratio is actually lean due to a vacuum leak or fuel control system fault.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.