Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1992SL L4-1.9L SOHC VIN 9REPAIR AND DIAGNOSISINSTRUMENT PANEL, GAUGES AND WARNING INDICATORSDESCRIPTION AND OPERATIONTURN SIGNAL SWITCH ASSEMBLY
1992 Saturn SL L4-1.9L SOHC VIN 9
Turn Signal Switch Assembly
1992 Saturn SL L4-1.9L SOHC VIN 9SECTION Turn Signal Switch Assembly
The turn signal switch assembly supplies a power signal to the right and left turn signal indicator lamps whenever the operator of the vehicle turns on the turn signals. This signal passes through a flasher relay, turns the signal On/Off causing the turn signals and turn signal indicator to flash. If the hazard flashers are turned, the signal is passed through the same flasher relay and both turn signal lamps will flash indicating the hazard flasher are ON.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.