Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1992SL L4-1.9L DOHC VIN 7REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSHEATING AND AIR CONDITIONINGCOMPRESSOR HVACSYSTEM SPECIFICATIONSTIGHTENING SPECIFICATIONS
1992 Saturn SL L4-1.9L DOHC VIN 7
Tightening Specifications
1992 Saturn SL L4-1.9L DOHC VIN 7SECTION Tightening Specifications
Bracket Bolts
Front 49 N.m (36 ft. lbs.)
Rear 25 N.m (19 ft. lbs.)
Low Side Hose 25 N.m (19 ft. lbs.)
High Side Hose 25 N.m (19 ft. lbs.)
Clutch Coil Screws 3.9-5.9 N.m (35-52 in. lbs.)
Center Pulley Bolt 11.8-14.7 N.m (104-130 in. lbs.)
Temperature Sensor 7.2 N.m (64 in. lbs.)
Pressure Relief Valve 7.2 N.m (63 in. lbs.)
Front 49 N.m (36 ft. lbs.)
Rear 25 N.m (19 ft. lbs.)
Low Side Hose 25 N.m (19 ft. lbs.)
High Side Hose 25 N.m (19 ft. lbs.)
Clutch Coil Screws 3.9-5.9 N.m (35-52 in. lbs.)
Center Pulley Bolt 11.8-14.7 N.m (104-130 in. lbs.)
Temperature Sensor 7.2 N.m (64 in. lbs.)
Pressure Relief Valve 7.2 N.m (63 in. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.