Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Heating, Ventilation & Air Conditioning Systems: Receiver-DRIERS
1992 Saturn SC AutomaticSECTION Receiver-DRIERS
NOTE:
For VIRs, see Valves in Receiver (VIRs). When replacing this component it is suggested to install or replace high and low side inline filters to prevent future component
| Condition | Code | Procedure |
|---|---|---|
| damage (see Code 5). | ||
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Contaminated, affecting performance | A | Require replacement |
| Desiccant at the end of its useful life (saturated with moisture) | 1 | Suggest repair or replacement |
| Desiccant bag deteriorated | A | Require replacement. Further inspection required |
|
NOTE:
Inspect system to determine effects of desiccant bag deterioration.
|
||
| Fusible plug leaking | A | Require replacement of plug |
| Leaking | B | Require replacement |
| Pressure relief device leaking | A | Require replacement of pressure relief device |
| Restricted | A | Require repair or replacement |
| Sight glass no longer transparent | 2 | Suggest replacement of drier |
| Threads damaged | A | Require repair or replacement |
| Threads stripped (threads missing) | A | Require replacement |
| Tubing connection leaking | A | Require repair or replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.