Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSAAB20109-5REPAIR AND DIAGNOSISELECTRICALHORNSLIGHTING AND SIGNALING SYSTEMSADJUSTMENT REPLACEMENTHEADLAMP BULB REPLACEMENT (XENON - LEFT SIDE)

2010 Saab 9-5

Headlamp Bulb Replacement (Xenon - Left Side)

2010 Saab 9-5SECTION Headlamp Bulb Replacement (Xenon - Left Side)

Fig 1: Identifying Headlamp Bulb Accessory Cover And Xenon Headlamp Bulb

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Callout

Component Name

WARNING: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.