To remove

2010 Saab 9-3X AutomaticSECTION To remove
  1. Fold the door mirror forward.
  2. Angle out the glass.
  3. Unhook the spring clip using a screwdriver.
    Fig 1: Unhooking Spring Clip With Screwdriver
    G05042644Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Unplug the connector and lift away the mirror.
    Fig 2: Identifying Mirror Connector
    G05042657Courtesy of SAAB-SCANIA OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.