Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Transmission General Specifications
2009 Saab 9-7X 5.3iSECTION Transmission General Specifications
Transmission General Specifications (4L60-E)
| Name | Hydra-matic 4L60-E |
|---|---|
| RPO Codes | M30 |
| Production Location | Toledo, Ohio Ramos Arizpe, Mexico |
| Vehicle Platform (Engine/Transmission) Usage | S/T |
| Transmission Drive | Longitudinally-Mounted Rear Wheel Drive |
| 1st Gear Ratio | 3.059:1 |
| 2nd Gear Ratio | 1.625:1 |
| 3rd Gear Ratio | 1.000:1 |
| 4th Gear Ratio | 0.696:1 |
| Reverse | 2.294:1 |
| Torque Converter Size (Diameter of Torque Converter Turbine) | 280 mm 300 mm |
| Pressure Taps | Line Pressure |
| Transmission Fluid Type | DEXRON® VI |
| Transmission Type: 4 | Four Forward Gears |
| Transmission Type: L | Longitudinal Mount |
| Transmission Type: 60 | Product Series |
| Transmission Type: E | Electronic Controls |
| Position Quadrant | P, R, N, Overdrive (Circle D), D, 2, 1 P, R, N, Overdrive (Circle D), 3, 2, 1 |
| Case Material | Die Cast Aluminum |
| Transmission Weight Dry (Approximate) | 280 mm Converter 70.5 kg (155.70 lbs) 300 mm Converter 86.17 kg (190.5 lbs) |
| Transmission Weight Wet (Approximate) | 280 mm Converter 83.0-84.8 kg (183-187 lbs) 300 mm Converter 98.4 kg (218.0 lbs) |
| Maximum Trailer Towing Capacity | 6,130 kg (13,500 lbs) |
| Maximum Gross Vehicle Weight (GVW) | 3,900 kg (8,600 lbs) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.