Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Digital Radio Receiver Scan Tool Information
2009 Saab 9-7X 5.3iSECTION Digital Radio Receiver Scan Tool Information
Digital Radio Receiver Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF/Radio ON | |||
| Battery Voltage | - | Varies | This displays volts. This is the voltage input supplied to the digital radio receiver. |
| Ignition Counter | - | Varies | This displays the number of times the ignition has been cycled from the OFF to ON position. |
| Power Mode | - | Run | The scan tool displays Reserved, Off Battery Save, Off Asleep, Off Awake, Unlock, RAP Unlock, Accessory, Run, Crank, or RAP. The status of the vehicle power mode (ignition switch). |
Digital Radio Receiver Output Controls
| Output Control | Description |
|---|---|
| DRR Setup | This output control is used to setup a new digital radio receiver (DRR). |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.