Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2009 Saab 9-7X 5.3iSECTION Removal Procedure
- Block the wheels to prevent the vehicle from moving.
- Remove the floor shift control knob. Refer to Floor Shift Control Knob Replacement .
- Remove the center console. Refer to Console Replacement .
- Disconnect the automatic transmission range selector cable. Refer to Range Selector Lever Cable Replacement .
- Disconnect the electrical connector from the automatic transmission shift interlock solenoid.
- Disconnect the electrical connector from the park brake.
- Remove the console bracket from the vehicle, by removing the retaining nuts (1) from the center instrument panel (I/P) bracket.
- Remove the forward retaining screw, if equipped.
- Remove the remaining fasteners from the console bracket.
- Remove the console bracket from the vehicle.
- Remove the floor shift control. Refer to Transmission Control Replacement .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.