Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20099-7X 5.3IREPAIR AND DIAGNOSISBODY & FRAMEFIXED AND MOVEABLE WINDOWSREPAIR INSTRUCTIONSREAR SIDE DOOR WINDOW REPLACEMENTREMOVAL PROCEDURE
2009 Saab 9-7X 5.3i
Removal Procedure
2009 Saab 9-7X 5.3iSECTION Removal Procedure
- Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
- Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Remove the outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
- Adjust the window to the remove/load position (2).
- Mark the location of the window at the regulator clamps.
- Loosen the 2 regulator clamp bolts.
- In order to remove the window out of the frame, carefully grasp and tilt the window as you guide the window up and forward.
- Remove the window from the door.
WARNING:
Refer to Glass and Sheet Metal Handling Warning
.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.