Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20099-7X 5.3IREPAIR AND DIAGNOSISBODY & FRAMEFIXED AND MOVEABLE WINDOWSREPAIR INSTRUCTIONSLIFTGATE WINDOW LATCH STRIKER ADJUSTMENT
2009 Saab 9-7X 5.3i
Liftgate Window Latch Striker Adjustment
2009 Saab 9-7X 5.3iSECTION Liftgate Window Latch Striker Adjustment
- Inspect the liftgate window for proper fit to the liftgate window weatherstrip:
- Open and close the liftgate window.
- If the liftgate window is hard to close, additional striker shims will need to be added.
- If the liftgate window does not seal tightly against the weatherstrip, striker shims will need to be removed.
- Open the liftgate window.
- Loosen the nuts retaining the liftgate striker to the liftgate window.
- Remove or add shims as determined above. Tighten the liftgate window striker nuts to 6 N.m (53 lb in).
- Inspect the liftgate window for proper fit, readjust if necessary.
- Close the liftgate window.
CAUTION:
Refer to Fastener Caution
.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.