Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2009 Saab 9-7X 5.3iSECTION Removal Procedure
- Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Remove the speaker. Refer to Radio Front Side Door Speaker Replacement .
- Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
- Remove the window. Refer to Front Side Door Window Replacement .
- Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement .
- Remove the 2 bolts that retain the weatherstrip/run channel to the door.
- Pull the weatherstrip/run channel away from the window frame opening.
- Carefully twist and pull up on the weatherstrip/run channel, in order remove the weatherstrip/run channel from the top of the door frame.
- Remove the weatherstrip/run channel from the door.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.