Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20099-7X 5.3IREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM AND PANELINGSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2009 Saab 9-7X 5.3i
Fastener Tightening Specifications
2009 Saab 9-7X 5.3iSECTION Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Auxiliary Air Outlet retaining Nuts | 2 N.m | 18 lb in |
| Coat Hook Retaining Bolts | 10 N.m | 89 lb in |
| Rear Quarter Trim Panel Screws | 2.5 N.m | 22 lb in |
| Seat Belt Anchor Bolts | 70 N.m | 52 lb ft |
| Seat Belt Lower Anchor Bolts | 70 N.m | 52 lb ft |
| Seat Belt Upper Guide Bolts | 70 N.m | 52 lb ft |
| Sunshade Inboard Retaining Screws | 1.2 N.m | 10 lb in |
| Trim Panel Retaining Bolts | 10 N.m | 89 lb in |
| Trim Panel Retaining Screws | 2.5 N.m | 22 lb in |
| Upper Quarter Trim Panel Screws | 2 N.m | 18 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.