Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fastener Tightening Specifications
2009 Saab 9-7X 5.3iSECTION Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Inlet Panel Grille Nuts | 4 N.m | 35 lb in |
| Front Wiper Arm Nuts | 23 N.m | 17 lb ft |
| Headlamp Washer Nozzle Assembly Screw | 2 N.m | 18 lb in |
| Rear Wiper Motor Assembly Nut | 20 N.m | 15 lb ft |
| Rear Wiper Arm Park Ramp Bolts | 6 N.m | 53 lb in |
| Rear Wiper Motor Bolts | 8 N.m | 71 lb in |
| Rear Wiper Motor Pivot Shaft Nut | 8 N.m | 71 lb in |
| Washer Solvent Container Assembly Nuts | 10 N.m | 89 lb in |
| Wiper Transmission Assembly Bolts | 10 N.m | 89 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.