Radio X1 (-UQA)

2009 Saab 9-7X 5.3iSECTION Radio X1 (-UQA)
Fig 1: Radio X1 (-UQA) Connector End View
GM73156Courtesy of GENERAL MOTORS CORP.
Radio X1 (-UQA)

Pin Wire Circuit Function
A1 0.35 OG 1044 Class 2 Serial Data
A2-A7 - - Not Used
A8 0.35 TN 201 Left Front Speaker Output (+)
A9 0.35 GY 118 Left Front Speaker Output (-)
A10 0.35 BK 1946 Right Rear Low Level Audio Signal (-)
A11 0.35 D-BU 546 Right Rear Low Level Audio Signal (+)
A12 0.35 BK/WH 751 Ground
B1 0.35 OG 340 Battery Positive Voltage
B2-B3 - - Not Used
B4 0.35 BN/WH 230 Instrument Panel Lamps Dimming Control
B5 0.35 BK 2250 Ground
B6-B7 - - Not Used
B8 0.35 BN 599 Left Rear Low Level Audio Signal (+)
B9 0.35 D-GN/WH 1547 Left Rear Low Level Audio Signal (-)
B10 0.35 D-GN 117 Right Front Speaker Output (-)
B11 0.35 L-GN 200 Right Front Speaker Output (+)
B12 - - Not Used
Connector Part Information 
  • OEM: 12110088
  • Service: 12110088
  • Description: 24-Way F Micro-Pack 100 Series Unsealed (GY)
Terminal Part Information 
  • Pins: A1, A8-A12, B1, B4-B5, B8-B11
  • Terminal/Tray: 12146447/3
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12031876-1/J-35616-6 (BN)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.