Generator Battery Control Module

2009 Saab 9-7X 5.3iSECTION Generator Battery Control Module
Fig 1: Generator Battery Control Module Connector End View
GM632344Courtesy of GENERAL MOTORS CORP.
Generator Battery Control Module

Pin Wire Circuit Function
A 0.8 OG 3840 Battery Positive Voltage
B 0.35 GY 23 Generator Field Duty Cycle Signal
C 0.8 OG 3840 Battery Positive Voltage
D 0.35 RD 225 Generator Turn On Signal
E - - Not Used
F 0.8 BK 450 Ground
G - - Not Used
H 0.8 BK 450 Ground
J 0.35 PU 5428 Generator Regulator Control
K 0.35 WH 1038 Class 2 Serial Data
Connector Part Information 
  • OEM: 15326842
  • Service: 15326842
  • Description: 10-Way F GT 150 Series Sealed (BK)
Terminal Part Information 
  • Pins: A, C, F, H
  • Terminal/Tray: 12191819/8
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
  • Pins: B, D, J-K
  • Terminal/Tray: 12191818/8
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.