Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSAAB20099-3 2.0T, 4D WAGON, FWD, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCETRIONIC T8 FUEL CONTROL SYSTEMREPAIR INSTRUCTIONSWIRING HARNESS, INJECTORS, B207TO FIT

2009 Saab 9-3 2.0T, 4D Wagon, FWD, Standard

To fit

2009 Saab 9-3 2.0T, 4D Wagon, FWD, StandardSECTION To fit

Move down the engine's connector under the intake manifold.
Fit the connector to the clip under the intake manifold (A).

Fig 1: Identifying Intake Manifold And Engine Wiring Harness Connector
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Plug in the wiring harness' connector for the engine (B).
Plug in the injectors' connector (A).

Fig 2: Identifying Plug In Injectors Connector
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the upper engine cover (A).

Fig 3: Identifying Upper Engine Cover
Courtesy of SAAB-SCANIA OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.