Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20069-2X F4-2.5LREPAIR AND DIAGNOSISBODY AND FRAMEMIRRORSSERVICE AND REPAIRREARVIEW MIRROR
2006 Saab 9-2X F4-2.5L
Rearview Mirror
2006 Saab 9-2X F4-2.5LSECTION Rearview Mirror
Rearview Mirror
Removal
NOTE: The spring cannot be reused. Prepare a new spring before removal.
Turn the mirror base 90° clockwise or counterclockwise to remove it.
Remove the spring from mirror base.
IMPORTANT: Be careful not to damage the mirror surface.
If the mirror base is damaged, remove the mirror base using piano wire or spatula, etc.
IMPORTANT: Be careful not to damage the windshield glass.
Installation
If removing the mirror base, remove the remaining adhesive thoroughly, and then fit the mirror base to mark on windshield glass to install.
Adhesive: REPAIR KIT IN MR (Part No. 32005173) or equivalent
Verify that the mirror base is adhered securely, and then install the spring.
Install in the reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.