Control Module, Window Lift, Rear, RH (575RR)

2005 Saab 9-3 Linear (9440) L4-2.0L Turbo (2.0t)SECTION Control Module, Window Lift, Rear, RH (575RR)


Control Module, Window Lift, Rear, RH (575RR), CV





Main purpose
The primary function of the RRDM is to control and supply the rear right-hand window lift (with optional pinch protection function).

The RRDM also has logic for the door mirror heater. The activation command is transmitted on the bus.

Type
Internally there is a microprocessor with clock, RAM and a flash EPROM. An internal bus which connects the processor and memory with the I/O unit. The I/O unit is responsible for reading in the values of A/D converted analogue inputs, digital inputs, bus signals and for activating transistors in the output amplifier.

For further information about the control module see control module, general description.

Power supply, ground and bus communication










RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.