Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20059-3 LINEAR (9440) L4-2.0L TURBO (2.0T)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTGLOBAL POSITIONING SYSTEMSERVICE AND REPAIRDVD MODULE (729)CONVERTIBLE
2005 Saab 9-3 Linear (9440) L4-2.0L Turbo (2.0t)
Convertible
2005 Saab 9-3 Linear (9440) L4-2.0L Turbo (2.0t)SECTION Convertible
DVD Module (729), CV
To remove
Carry out procedures before removing a control module.
1. Remove the side luggage compartment trim.
2. Remove the navigation unit with 84 71 203 Removal tool.
IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection.
3. Unplug the connector.
To fit
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection.
1. Plug in the connector.
2. Fit the navigation unit. A clicking sound should be heard.
3. Fit the side luggage compartment trim.
4. Carry out procedures after changing a control module.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.