Mirrors: Testing and Inspection

2003 Saab 9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT)SECTION Testing and Inspection


Electric Door Mirrors Not Functioning







Fault symptoms

Electric door mirrors not functioning

Diagnostic help

1. Check fuse 7 as well as if there is power to the fuses.
2. Check the voltage in pin 5 on switch 124.
3. Check that the power goes out to the motors 126D and 126P by activating the switch.
4. Check connector, wiring and ground connection.
5. If the electric window lifts in the rear doors cannot be operated from the switches in respective rear door, check that the voltage is being fed out via pin 9 ON/OFF on the switch.
6. Check the rear door switch function by measuring on their connections.
7. Check connector, wiring and ground connections.







Fault diagnosis procedure is not available.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.