Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2000 Saab 9-5 Aero, 4D Wagon, Standard
Quick Lookups: Fluids
2000 Saab 9-5 Aero, 4D Wagon, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.90 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.92 LBS. | 0.87 KG | R-134a | S | |||
| Automatic Transmission Fluid | 7.50 QTS. | 7.09 L | Automatic Transmission Fluid TEXACO Texamatic DEXRON III | S | |||
| Brake Fluid | N/A | N/A | DOT 4 Brake Fluid | DO NOT use DOT 5. | S | ||
| Engine Coolant | In-Line4 | 7.60 QTS. | 7.19 L | SAAB approved Antifreeze | S | ||
| Engine Oil | In-Line4 | 4.10 QTS. | 3.88 L | API - SAE 10W-30 or 10W-40 | S | ||
| Fuel Tank | 18.50 GALS. | 70.03 L | S | ||||
| Manual Transmission Fluid | 1.90 QTS. | 1.79 L | SAAB Synthetic Gearbox Oil | Refer to TSB No. 02-04-471. | S | ||
| Power Steering Fluid | N/A | N/A | Power Steering Fluid (CHF 11S) | S | |||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Fluid | If windshield washer fluid is not available use clean water. In areas where water freezes in winter, use an antifreeze type windshield washer fluid. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.