Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20009-3 CONVERTIBLE (9400) L4-2.0L TURBO (B205)REPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRREMOVAL AND REPLACEMENTFRONT SEATSEAT SIDE PANEL
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)
Seat Side Panel
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)SECTION Seat Side Panel
Seat Side Panel
To remove
1. Manual seat: Remove the handle for the height adjustment and the backrest recliner knob.
2. Remove the seat side panel, 2 caps and 3 screws. Lift the back of the side panel and pull it forwards.
NOTE: Electrically adjustable seat: The front bolt has a protector on its tip. Retain this protector as it must be fitted to the bolt to prevent it from chafing against electrical wiring.
3. Electrically adjustable front seat: Detach the connector for the switch and any memory buttons.
To fit
Fit in reverse order.
IMPORTANT: Electrically adjustable seat: Fit the protection on the front bolt.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.