Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20009-3 CONVERTIBLE (9400) L4-2.0L TURBO (B205)REPAIR AND DIAGNOSISBODY AND FRAMEROOF AND ASSOCIATED COMPONENTSCONVERTIBLE TOPSERVICE AND REPAIRPROCEDURESREAR SEAT BELT-BUCKLE
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)
Rear Seat Belt-Buckle
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)SECTION Rear Seat Belt-Buckle
Removing
1 Remove the rear seat cushion.
2 Fold the backrest cushion forward halfway so that the bolts securing the belt-buckle are accessible.
3 Remove the nut securing the belt-buckle.
4 Remove the bolts securing the belt-buckle bracket.
Fitting
1 Fit the belt-buckle bracket and tighten the bolts.
Tightening torque: 45 Nm (33.3 lbf ft)
Fit the belt-buckle and tighten the nut.
Tightening torque: 45 Nm (33.3 lbf ft)
3 Refit the seat cushion.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.