Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB19999-3 BASE, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSA/C-HEATER SYSTEM - MANUALADJUSTMENTSAIR-MIXING DAMPER CONTROL WIRE
1999 Saab 9-3 Base, 2D Hatchback, Automatic
Air-Mixing Damper Control Wire
1999 Saab 9-3 Base, 2D Hatchback, AutomaticSECTION Air-Mixing Damper Control Wire
- Ensure air-mixing control wire is properly secured to control panel (above control shaft). Remove both clips securing air-mixing damper control wire to climate control unit damper linkage. Turn temperature control knob to full cold position.
- Push air-mixing damper linkage as far forward as possible. Press both clips securing control wire sheath to climate control unit. Turn temperature control knob to full hot position and back to full cold position several times. Ensure air-mixing damper seals properly at each end position.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.