Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB19999-3 BASE, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTSTEERING COLUMN SWITCHESCOMPONENT TESTSTURN SIGNAL SWITCH9-3
1999 Saab 9-3 Base, 2D Hatchback, Automatic
Turn Signal Switch: 9-3
1999 Saab 9-3 Base, 2D Hatchback, AutomaticSECTION 9-3
- Turn ignition on. Check fuse No. 22. See WIRING DIAGRAMS . If fuse is okay, ensure voltage supply to fuse is good.
- Ensure voltage is present at turn signal switch terminal No. 3 (Brown/White wire). Check all connectors, wiring and grounds.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.