Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB19959000 CS, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONRESTRAINTSAIR BAG DEACTIVATION PROCEDURESLAND ROVERDISABLING & ACTIVATING AIR BAG SYSTEM
1995 Saab 9000 CS, Automatic
Disabling & Activating Air Bag System
1995 Saab 9000 CS, AutomaticSECTION Disabling & Activating Air Bag System
WARNING:
Back-up power supply maintains SRS voltage for about 20 minutes after battery Is disconnected. After disabling SRS, wait at least 20 minutes before servicing SRS to prevent accidental air bag deployment and possible personal injury
To disable SRS, turn ignition switch to LOCK position. Disconnect negative battery cable. Wait at least 20 minutes before servicing SRS. To activate SRS, reconnect negative battery cable. Perform SYSTEM OPERATION CHECK .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.