SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB1995900 SE, 4D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSCOMMON SPECS & PROCEDURESSPECIFICATIONS INDEX
1995 Saab 900 SE, 4D Hatchback, Automatic

Specifications Index

1995 Saab 900 SE, 4D Hatchback, AutomaticSECTION Specifications Index
900 SPECIFICATIONS INDEX

System Specification/Procedure
Air Conditioning
Service A/C SYSTEM GENERAL SERVICING
Torque N/A
Axle Nut/Hub Nut 207-222 ft.lb (280-300 N.m)
Battery
2.0L See "BATTERY SPECIFICATIONS" table under CAPACITIES
2.3L See "BATTERY SPECIFICATIONS" table under CAPACITIES
2.5L See "BATTERY SPECIFICATIONS" table under CAPACITIES
Brakes
Bleeding Sequence BLEEDING BRAKE SYSTEM
Disc Brakes
Service Specifications DISC BRAKE SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Drum Brakes
Service Specifications N/A
Torque N/A
Charging
Generator DESCRIPTION
Torque N/A
Drive Belts
Adjustment BELT TENSION SPECIFICATIONS
Drive Belt Routing DRIVE BELT ROUTING
Engine Cooling
General Service Specifications COOLING SYSTEM SPECIFICATIONS
Radiator Cap Pressure 13.0-17.5 psi
Thermostat R & I THERMOSTAT
Water Pump R & I WATER PUMP
Engine Mechanical
Compression
2.0L ENGINE COMPRESSION
2.3L ENGINE COMPRESSION
2.5L ENGINE COMPRESSION
Oil Pressure Oil pressure is 43 psi (3.0 kg/cm2 ) at 2000 RPM.
Overhaul
2.0L ENGINE SPECIFICATIONS
2.3L ENGINE SPECIFICATIONS
2.5L ENGINE SPECIFICATIONS
Torque
2.0L TORQUE SPECIFICATIONS
2.3L TORQUE SPECIFICATIONS
2.5L TORQUE SPECIFICATIONS
Fluid Specifications See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate/Drive Plate Torque
2.0L & 2.3L 59 ft.lb (80N.m)
2.5L 48 ft.lb (65 N.m) Plus 30°
Fuel System
Pressure Specification 43.5 psi (3.0 kg/cm2 )
Fuel Pressure Test Procedure
2.0L FUEL PRESSURE
2.3L FUEL PRESSURE
2.5L FUEL PRESSURE
Fuel Filter Location N/A
Fuel Filter R & I N/A
Ignition
2.0L
Firing Order & Cylinder Identification FIRING ORDER
Ignition Wires (Resistance) HIGH TENSION WIRE RESISTANCE
Ignition Wires (Routing) N/A
2.3L
Firing Order & Cylinder Identification FIRING ORDER
Ignition Wires (Resistance) HIGH TENSION WIRE RESISTANCE
Ignition Wires (Routing) N/A
2.5L
Firing Order & Cylinder Identification FIRING ORDER
Ignition Wires (Resistance) HIGH TENSION WIRE RESISTANCE
Ignition Wires (Routing) N/A
Spark Plug
2.0L
NGK BPR7ES
Gap .039 In. (1.0 mm)
Torque 18.5-21.5 ft.lb (25-29 N.m)
2.3L
NGK BCP5EV Or BCP6EV
Gap .024 In. (0.60 mm)
Torque 18.5-21.5 ft.lb (25-29 N.m)
2.5L
Bosch FR8LDC
Gap .031 In. (.80 mm)
Torque 18.5-21.5 ft.lb (25-29 N.m)
Starting
Starter ON-VEHICLE TESTING
Torque TORQUE SPECIFICATIONS
Wheel Alignment
Adjustment Specifications WHEEL ALIGNMENT SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Wheel & Tire
Wheel Lug Nut Torque 77-95 ft.lb (105-130 N.m)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.