Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB1995900 S, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSA/C-HEATER SYSTEM - AUTOMATICFAULT DIAGNOSISDTC B1360, A/C-HEATER CONTROL PANEL PUSH BUTTON CIRCUIT
1995 Saab 900 S, 2D Hatchback, Automatic
DTC B1360, A/C-Heater Control Panel Push Button Circuit
1995 Saab 900 S, 2D Hatchback, AutomaticSECTION DTC B1360, A/C-Heater Control Panel Push Button Circuit
- Connect Saab ISAT Scan Tester to data link connector. Enter PUSHBUTTONS command on scan tester, and then press the push buttons on A/C-heater control panel. If a button is okay, the scan tester will display ON.
- If scan tester displays ON without a push button being pressed, then one of the push buttons has jammed (stuck on). Push buttons should spring back to original (off) position. Locate jammed push button, and correct fault as necessary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.