Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB1995900 S, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISGENERAL INFORMATIONRESTRAINTSAIR BAG DEACTIVATION PROCEDURESVOLVODISABLING & ACTIVATING AIR BAG SYSTEMDISABLING SYSTEM
1995 Saab 900 S, 2D Hatchback, Automatic
Disabling System
1995 Saab 900 S, 2D Hatchback, AutomaticSECTION Disabling System
- Before proceeding, see SERVICE PRECAUTIONS . Before performing any repairs, turn ignition switch to OFF position. Disconnect and shield negative battery cable. Locate and disconnect air bag module and seat belt tensioner connectors and passenger-side air bag module connector.
- On 1995-96 850 and 1996 960 models with side air bags, remove cover from side seat compartment. Remove transport safety device from inside of cover. Install transport safety device onto side impact sensor. See Fig 1. Repeat procedure for opposite front seat. SRS system is now disabled.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.