Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB1995900 S, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISGENERAL INFORMATIONRESTRAINTSAIR BAG DEACTIVATION PROCEDURESSUZUKIDISABLING & ACTIVATING AIR BAG SYSTEMDISABLING SYSTEM
1995 Saab 900 S, 2D Hatchback, Automatic
Disabling System
1995 Saab 900 S, 2D Hatchback, AutomaticSECTION Disabling System
- Ensure wheels are in straight-ahead position. Turn ignition switch to LOCK position. Remove ignition key. Remove AIR BAG or AIR BAG IGN fuse from fuse block, located on left kick panel. Remove left side cap from steering wheel. Release locking lever and disconnect Yellow connector for driver-side air bag module.
- Pull out glove box while pushing in both right and left sides. Release locking lever and disconnect Yellow connector for passenger-side air bag module (located in glove box opening).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.