Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB1995900 S, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 4 (WIPER/WASHER SYSTEM)COMPONENT TESTSWIPER SWITCH
1995 Saab 900 S, 2D Hatchback, Automatic
Wiper Switch
1995 Saab 900 S, 2D Hatchback, AutomaticSECTION Wiper Switch
WARNING: This page is about a different car, the 1997 Saab 900. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition on. Check fuse No. 31. If fuse is okay, ensure voltage supply to fuse is good. Ensure voltage is present at wiper motor, wiper switch and wiper relay Brown wire.
- Turn wipers on to low speed. Ensure voltage is present at wiper motor, wiper relay and wiper switch Red wire. Turn wiper switch to high speed. Ensure voltage is present at wiper motor, wiper relay and wiper switch Green wire. If voltage is present as specified, check all connectors, wiring and grounds.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.