SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB19949000 CS, 2.3 B, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)RESTRAINTSAIR BAG, SRSAIR BAG RESTRAINT SYSTEMREMOVAL & INSTALLATIONCLOCKSPRINGREMOVAL
1994 Saab 9000 CS, 2.3 B, Standard

Removal & Installation: CLOCKSPRING: Removal

1994 Saab 9000 CS, 2.3 B, StandardSECTION Removal
  1. Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS. Disable SRS. See DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Clockspring is located under steering wheel. Remove steering wheel. See STEERING WHEEL under REMOVAL & INSTALLATION. Remove 2 screws from upper steering column shroud. Remove plastic retainer from bottom of lower steering column shroud, and remove lower steering column shroud. Disconnect air bag module and horn pad connectors from steering column harness.
  3. Remove 4 screws from lower edge of instrument panel (note different lengths of screws). Remove 2 screws from lower edge of clockspring mounting plate.
  4. Raise instrument panel and upper steering column shroud slightly, and remove clockspring mounting screws. Carefully remove clock-spring.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.