Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB19939000 CD, 2.3 B, STANDARDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSOVERHAUL - ZF 4HP 18ON-VEHICLE SERVICETHROTTLE VALVE CABLE REPLACEMENTREMOVAL
1993 Saab 9000 CD, 2.3 B, Standard
Throttle Valve Cable Replacement: Removal
1993 Saab 9000 CD, 2.3 B, StandardSECTION Removal
- Loosen lock nuts securing throttle valve cable in bracket at throttle body. Disconnect cable from throttle lever and remove from bracket.
- Remove valve body. See VALVE BODY ASSEMBLY . Disconnect throttle valve cable from pin on throttle cam.
- Using a 10-mm socket and extension, push throttle valve cable out of A/T case. See Figure. Remove cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.