Removing Control Unit For Telephone Module

2016 Porsche Cayenne TurboSECTION Removing Control Unit For Telephone Module
  1. Carefully open the cover on the PCM display and operator control unit using a screwdriver.
    Fig 1: Opening Control Unit Cover
    G09941859Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -1-Β  and pull telephone control unit up and out.
    Fig 2: Identifying Telephone Control Unit Screws
    G09941860Courtesy of PORSCHE CARS NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.