Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2010G6 V6-3.5LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSMANIFOLD PRESSURE/VACUUM SENSORLOCATIONSDISASSEMBLED VIEWS
2010 Pontiac G6 V6-3.5L
Disassembled Views
2010 Pontiac G6 V6-3.5LSECTION Disassembled Views
Disassembled Views
Upper Intake Manifold and Components
1 - Upper Intake Manifold
2 - Upper Intake Manifold Stud
3 - Upper Intake Manifold Bolt
4 - Upper Intake Manifold Bolt
5 - Manifold Absolute Pressure Sensor Bracket
6 - Manifold Absolute Pressure Sensor
7 - Manifold Absolute Pressure Sensor Seal
8 - Evaporative Emission Canister Purge Solenoid Valve Bolt
9 - Evaporative Emission Canister Purge Solenoid Valve
10 - Evaporative Emission Canister Purge Solenoid Valve Seal
11 - Throttle Body Stud
12 - Throttle Body Seal
13 - Throttle Body
14 - Throttle Body Bolt
15 - Throttle Body Nut
16 - Positive Crankcase Ventilation Tube
17 - Oil Filler Cap
18 - Oil Filler Cap Seal
19 - Oil Filler Tube
20 - Oil Filler Tube Seal
21 - Valve Rocker Arm Cover
22 - Valve Rocker Arm Cover Gasket
23 - Positive Crankcase Ventilation Tube
24 - Engine Coolant Filler Cap
25 - Engine Coolant Filler Tube Adapter Seal
26 - Engine Coolant Filler Tube Adapter Seal
27 - Engine Coolant Filler Tube Adapter
28 - Engine Coolant Filler Tube Adapter Bolt
29 - Engine Coolant Filler Tube Adapter Seal
30 - Engine Coolant Crossover Pipe Gasket
31 - Engine Coolant Crossover Pipe Gasket
32 - Engine Coolant Crossover Pipe
33 - Engine Coolant Crossover Pipe Bolt
34 - Belt Idler Pulley
35 - Belt Idler Pulley Bolt
36 - Belt Idler Pulley
37 - Belt Idler Pulley Bolt
38 - Engine Lift Front Bracket Bolt
39 - Belt Idler Pulley Bolt
40 - Belt Idler Pulley
41 - Engine Lift Front Bracket Bolt
42 - Engine Lift Front Bracket
43 - Water Outlet Bolt
44 - Ignition Coil Stud
45 - Ignition Coil
46 - Ignition Coil Nut
47 - Ignition Coil Bolt
50 - Upper Intake Manifold Gasket
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.