SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2007WAVE LT, 4D HATCHBACK, STANDARD, Y4M/MLMREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 9 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSHEADLAMP REPLACEMENT (HATCHBACK)REMOVAL PROCEDURE
2007 Pontiac Wave LT, 4D Hatchback, Standard, Y4M/MLM

Removal Procedure

2007 Pontiac Wave LT, 4D Hatchback, Standard, Y4M/MLMSECTION Removal Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Headlamp and Mounting Bolts (Notchback)
    GM1248410Courtesy of GENERAL MOTORS CORP.
  1. Remove the headlamp mounting bolts.
  2. Disconnect the electrical connectors.
    3. Fig 2: View of Headlamp Assembly and Bulb (Notchback)
    GM1248412Courtesy of GENERAL MOTORS CORP.
  3. Remove the headlamp assembly.
  4. Remove the cap concealing the headlamp bulb.
  5. Disconnect the headlamp bulb electrical connector.
  6. Remove the retaining wire.
  7. Remove the headlamp bulb.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.