Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSPONTIAC2007WAVE LT, 4D HATCHBACK, STANDARD, Y4M/MLMREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEMSPECIFICATIONSABS COMPONENT SPECIFICATIONS

2007 Pontiac Wave LT, 4D Hatchback, Standard, Y4M/MLM

ABS Component Specifications

2007 Pontiac Wave LT, 4D Hatchback, Standard, Y4M/MLMSECTION ABS Component Specifications

Application	Specification
Application	Metric	English
Antilock Brake System (ABS) Main Relay Operation Voltage	10-16 V
Antilock Brake System (ABS) Mode	4 Channel 4 Sensor
Brake Oil
Capacity	0.5 L	0.53 qt
Type	DOT-3
Speed Ring
Inside Diameter - Front	73.75 mm	2.9035 in
Inside Diameter - Rear	67 mm	2.6378 in
Outside Diameter - Front	83.72 mm	3.2961 in
Outside Diameter - Rear	77 mm	3.0315 in
Tooth Volume of the Speed Ring - Front	47 EA
Tooth Volume of the Speed Ring - Rear	34 EA
Wheel Speed Sensor (Front) - Resistance	998-1,208 Ω
Wheel Speed Sensor (Rear) - Resistance	2,295-2,500 Ω

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.