Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Data List
The EBCM Scan Tool Data Lists contain all the antilock brake system related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The column, 'Data List,' indicates the location of the parameter within the scan tool menu selections.
Use the EBCM Scan Tool Data Lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all the diagnostic procedures with the ABS Diagnostic Starting Point. Use the EBCM Scan Tool Data Lists only after the following is determined:
- There is no published DTC procedure nor published symptom procedure for the customer concern.
OR
- The DTC or symptom diagnostic procedure indicated by the diagnostic system check does not resolve the customer concern.
The Typical Data Values are obtained from a properly operating vehicle under the conditions specified in the first row of the Scan Tool Data List table. Comparison of the parameter values from the suspect vehicle with the Typical Data Values may reveal the source of the customer concern.
The ID Information menu is located on the EBCM main screen.
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, Engine OFF, and vehicle is stationary | |||
| ABS Warning Indicator | ABS Data | On/Off | Off |
| Battery Voltage Signal | ABS Data | Volts | B+ |
| Brake Switch | ABS Data | Applied/Released | Released |
| DRP Disabled | ABS Data | Yes/No | No |
| LF Wheel Speed Sensor | ABS Data | mph/km/h | 0 |
| LR Wheel Speed Sensor | ABS Data | mph/km/h | 0 |
| LF Inlet Solenoid Command | ABS Data | On/Off | Off |
| LF Outlet Solenoid Command | ABS Data | On/Off | Off |
| LR Inlet Solenoid Command | ABS Data | On/Off | Off |
| LR Outlet Solenoid Command | ABS Data | On/Off | Off |
| Pump Motor Command | ABS Data | On/Off | Off |
| Pump Motor Relay Command | ABS Data | On/Off | Off |
| RF Wheel Speed Sensor | ABS Data | mph/km/h | 0 |
| RR Wheel Speed Sensor | ABS Data | mph/km/h | 0 |
| RF Inlet Solenoid Command | ABS Data | On/Off | Off |
| RF Outlet Solenoid Command | ABS Data | On/Off | Off |
| RR Inlet Solenoid Command | ABS Data | On/Off | Off |
| RR Outlet Solenoid Command | ABS Data | On/Off | Off |
| Solenoid Relay Command | ABS Data | On/Off | Off |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.