Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2007WAVE LT, 4D HATCHBACK, STANDARD, Y4M/MLMREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALOEM CONNECTOR END VIEWSINLINE HARNESS CONNECTOR END VIEWS (HATCHBACK)C381 BODY HARNESS CONNECTOR END VIEW
2007 Pontiac Wave LT, 4D Hatchback, Standard, Y4M/MLM
C381 Body Harness Connector End View
2007 Pontiac Wave LT, 4D Hatchback, Standard, Y4M/MLMSECTION C381 Body Harness Connector End View
C381 Body Harness to Right Rear Door Harness Connector End View/Part Information/Terminal Identification
| Connector Part Information |
|
Connector Part Information |
|
||||
|---|---|---|---|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function | Pin | Wire Color | Circuit No. | Function |
| 1 | WH | 295 | Door Lock Actuator Lock Control | 1 | WH | 295 | Door Lock Actuator Lock Control |
| 2 | D-BU | 294 | Door Lock Actuator Unlock Control | 2 | D-BU | 294 | Door Lock Actuator Unlock Control |
| 3 | PU | 171 | Power Window Master Switch Left Rear Down Signal | 3 | GY/OG | 169 | Power Window Master Switch Right Rear Down Signal |
| 4 | L-BU | 170 | Power Window Master Switch Right Rear Up Signal | 4 | L-GN/BK | 168 | Power Window Master Switch Right Rear Up Signal |
| 5 | BN/OG | 1307 | Power Window Master Switch Lockout Control | 5 | BN/OG | 1307 | Power Window Master Switch Lockout Control |
| 6 | - | - | Not Used | 6 | - | - | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.